Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Rear Compartment Lid Release System Check performed? | -- | ||
2 | Activate the power door lock switch in one direction and then in the other direction. Do the door locks activate? | -- | ||
3 |
Does the test light illuminate? | -- | ||
4 |
Does the test light illuminate? | -- | ||
5 |
Does the test light illuminate? | -- | ||
6 | With a test light, connect between the rear compartment lid lock release actuator terminal B and B+. Does the test light illuminate? | -- | ||
7 | With a test light, connect between the rear compartment lid release relay connector terminal C1 and ground. Does the test light illuminate? | -- | ||
8 |
Does the test light illuminate? | -- | ||
9 |
Has the repair been completed? | -- | -- | |
10 | Replace the rear compartment lid lock release actuator. Refer to Rear Compartment Lid Lock Actuator Replacement for service procedure. Has the repair been completed? | -- | -- | |
11 | Replace the rear compartment lid release relay. Has the repair been completed? | -- | -- | |
12 | Locate and repair the open in circuit 350. Testing for Intermittent Conditions and Poor Connections In wiring Systems. Has the repair been completed? | -- | -- | |
13 | Locate and repair the open in circuit 1540. Testing for Intermittent Conditions and Poor Connections In wiring Systems. Has the repair been completed? | -- | -- | |
14 | Locate and repair the open in circuit 253. Testing for Intermittent Conditions and Poor Connections In wiring Systems. Has the repair been completed? | -- | -- | |
15 | Locate and repair the open in circuit 56. Testing for Intermittent Conditions and Poor Connections In wiring Systems. Has the repair been completed? | -- | -- | |
16 | Verify that the system operates properly. Does the system operate properly ? | -- | System OK | Go to Symptoms |
