GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Informatiom.
  2. Remove the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the caliper bracket. Refer to Rear Brake Caliper Replacement .
  4. Remove the brake rotor.
  5. Clean the metal contact surfaces between the brake rotor and the hub bearing flange.

Installation Procedure

  1. Install the brake rotor.
  2. Install the caliper bracket. Refer to Rear Brake Caliper Replacement .
  3. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.