For 1990-2009 cars only
Removal Procedure
- Remove the adjuster track covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
- Move the seat forward to between the mid-position and full forward and also the full-up position.
- Remove the headrest. Refer to Front Seat Head Restraint Replacement .
- Remove the seat adjuster to floor pan bolts.
- Tip the seat forward and remove the front seat retractor side belt nut from the front seat.
- Remove the power seat electrical connector, if equipped.
- Remove the seat from the front hook attachments.
- Remove the seat from the vehicle.
Installation Procedure
- Position the front seat in the vehicle.
- Tip the seat forward and engage the front hook attachments.
- Install the front seat retractor side belt nut to the front seat.
- Install the power seat electrical connector, if equipped.
- Snap the track covers onto the adjusters. Refer to Front Seat Adjuster Track Finish Cover Replacement .
- Install the seat adjuster to floor pan bolts.
- Move the seat to it origional position.
- Install the headrest. Refer to Front Seat Head Restraint Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the side belt nut to 42 N·m (31 lb ft).
Tighten
Tighten the adjuster to floorpan bolts to 24 N·m (18 lb ft).
