For 1990-2009 cars only
Removal Procedure
- Grasp the front and rear edges of the dome lamp housing and squeeze together to release the retainers along the sides of the housing, while carefully pulling the housing down away from the lamp base plate.
- Remove the bulb from the dome lamp socket.
- Drill out the rivets retaining the lamp base plate.
- Disconnect the electrical connector from the dome lamp base plate.
- Remove the dome lamp base plate.
Installation Procedure
- Connect the electrical connector to the dome lamp base plate.
- Position the dome lamp base plate and install new rivets to secure the plate in place.
- Install the bulb to the dome lamp socket.
- Align the dome lamp housing to the base plate and press to snap into place.
