Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Is the headlamp bulb and connectors OK? | -- | Go to Step 2 | Go to Step 9 |
2 |
Does the test light illuminate? | -- | Go to Step 5 | Go to Step 4 |
3 | Repair a poor connection or an open in circuit 12 between the underhood accessory wiring junction block harness connector C3 terminal B12 and the right headlamp harness connector C141 terminal H. Has the repair been made? | -- | Go to Headlight System Check | -- |
4 | Using a test light, backprobe between the underhood accessory wiring junction block harness connector C3 terminal B12 and ground. Does the test light illuminate? | -- | Go to Step 3 | Go to Step 8 |
5 | Using a test light, backprobe between the right headlamp harness connector C142 terminal H and terminal J. Does the test light illuminate? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair a poor connection or an open in circuit 1350 between the left headlamp wiring harness connector C142 terminal J and G101. Has the repair been made? | -- | Go to Headlight System Check | -- |
7 | Replace the right headlamp. Refer to Headlamp Replacement . Has the repair been made? | -- | Go to Headlight System Check | -- |
8 | Replace the underhood wiring junction block. Refer to Accessory Wiring Junction Block Replacement in Body Front End. Has the repair been made? | -- | Go to Headlight System Check | -- |
9 | Replace the damage component. Has the repair been made? | -- | Go to Headlight System Check | -- |
