Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Is the headlamp bulb and connector OK? | -- | Go to Step 2 | Go to Step 9 |
2 |
Does the test light illuminate? | -- | Go to Step 5 | Go to Step 4 |
3 | Repair a poor connection or an open in circuit 11 between the underhood accessory wiring junction block harness connector C3 terminal B11 and the right headlamp harness connector C142 terminal F. Has the repair been made? | -- | Go to Headlight System Check | -- |
4 | Using a test light, backprobe between the underhood accessory wiring junction block harness connector C3 terminal B11 and ground. Does the test light illuminate? | -- | Go to Step 3 | Go to Step 8 |
5 | Using a test light, backprobe between the right headlamp harness connector C142 terminal F and terminal G. Does the test light illuminate? | -- | Go to Step 7 | Go to Step 6 |
6 | Repair a poor connection or an open in circuit 1750 between the right headlamp wiring harness connector C142 terminal G and G101 Has the repair been made and the system rechecked? | -- | Go to Headlight System Check | -- |
7 | Replace the right headlamp. Refer to Headlamp Replacement . Has the repair been made and the system rechecked? | -- | Go to Headlight System Check | -- |
8 | Replace the underhood wiring junction block. Refer to Accessory Wiring Junction Block Replacement in Body Front End. Has the repair been made and the system rechecked? | -- | Go to Headlight System Check | -- |
9 | Replace the damaged component. Has the repair been made? | -- | Go to Headlight System Check | -- |
