For 1990-2009 cars only
Removal Procedure
- Firmly grasp the side repeater lamp assembly and apply light pressure toward the front of the vehicle, in order to release the rear retaining tab.
- While still applying light pressure, pull the rear edge of the lamp away from the fender just enough to clear the lamp rear retaining tab.
- Releave the forward pressure and remove the lamp assembly from the fender.
- Disconnect the electrical connector from the side repeater lamp assembly, if replacing the assembly.
- Rotate the side repeater lamp socket counterclockwise to release, if replacing the bulb.
- Remove the bulb from the socket, if replacing the bulb.
Installation Procedure
- Install the bulb to the socket, if removed.
- Position the side repeater lamp socket to the lamp assembly, then rotate clockwise to secure, if removed.
- Connect the electrical connector to the side repeater lamp assembly, if removed.
- Insert the side repeater lamp assembly rear retaining tab to the slot in the fender.
- Align the lamp assembly to the fender and press the forward edge of the lamp into place to secure the forward retaining tab in place.
Check that the seal on the back of the repeater lamp assembly remains in position.
