Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 | Check for an open wiper fuse. Is the fuse open? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper fuse. Is the replacement complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 6 | Go to Step 5 |
5 | Repair the poor connection or open in CKT 243 to the wiper/washer switch. Is the repair complete? | -- | -- | |
6 |
Is the test light on? | -- | Go to Step 9 | Go to Step 7 |
7 | Check for a poor connection at connector C201, terminal E1. Also, check for an open in the pigtail (CKT 243) to the wiper/washer switch. Is a poor connection or an open present? | -- | Go to Step 8 | Go to Step 16 |
8 | Repair the poor connection or the open in the pigtail (CKT 243). Is the repair complete? | -- | -- | |
9 |
Is the test light on? | -- | Go to Step 11 | Go to Step 10 |
10 | Repair the poor connection or the open in CKT 92 between connector C201 and the wiper motor . Is the repair complete? | -- | -- | |
11 | Connect the test light from the wiper motor connector, terminal C to terminal A. Is the test light on? | -- | Go to Step 13 | Go to Step 12 |
12 | Repair the poor connection or open in ground CKT 1650. Is the repair complete? | -- | -- | |
13 | Check for a poor connection to the wiper motor. Is a poor connection present? | -- | Go to Step 15 | Go to Step 14 |
14 | Replace the wiper motor . Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
15 | Repair the poor connection. Is the repair complete? | -- | -- | |
16 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the replacement complete? | -- | -- |
