For 1990-2009 cars only
Removal Procedure
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
- Remove the front floor console rear accessory trim plate.
- Disconnect the rear seat audio control electrical connectors.
- Remove the rear seat audio controls from the rear accessory trim plate by pressing in the tabs.
Installation Procedure
- Install the front floor console rear accessory trim plate.
- Connect the rear seat audio control electrical connectors.
- Install the rear seat audio control by pressing into place until fully seated.
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
