The front inside door handle bezel has an electrical connector for the power door lock system only.

1. For the front door, remove the inside door handle bezel screw.
2. Remove the inside door handle bezel by lifting to release the retainers.
3. Remove the inside door handle bezel door lock and the speaker electrical connectors.



4. Remove the inside door handle bezel.



5. For the rear door, remove the inside door handle bezel by lifting to release the retainers.



6. Remove the inside door handle bezel from the vehicle.

1. Connect the electrical door lock to the inside door handle bezel and connect the speaker wire (Front Door).



2. Install the inside door handle bezel to the door and install the screw.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the inside door handle bezel screw.

Tighten
Tighten the inside door handle bezel screw to 2 N·m (18 lb in).




4. Install the inside door handle bezel to the door. (Rear Door)