Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the rear compartment lid release system check performed? | -- | ||
2 | Install a scan tool and check for Diagnostic Trouble Codes (DTCs) in the Body Control Module (BCM). Is DTC B3102, B3103, B3106, B3267 or B3268 set? | -- | Go to Diagnostic Trouble Code (DTC) List/Type in Body Control Systems | |
3 | Activate the power door lock switch in one direction and then in the other direction. Do the door locks activate? | -- | ||
4 |
Does the test light illuminate? | -- | ||
5 | With a test light ,backprobe between the rear compartment lid release relay terminals A1 to ground and C1 to ground? Does the test light illuminate in each case? | -- | ||
6 |
Does the test light illuminate? | -- | ||
7 |
Does the test light illuminate? | -- | ||
8 | With a test light ,connect between the rear compartment lid latch release actuator terminal B and B+. Does the test light illuminate? | -- | ||
9 | Repair the open in circuit 56. Is the repair complete? | -- | -- | |
10 |
Is the repair complete? | -- | -- | |
11 | Replace the rear compartment lid lock release actuator. Refer to Release Actuator Replacement for service procedure. Is the repair complete? | -- | -- | |
12 | Replace the rear compartment lid release relay. Is the repair complete? | -- | -- | |
13 | Repair an open or short to ground in circuit 1540. Is the repair complete? | -- | -- | |
14 | Repair the open in circuit 350. Is the repair complete? | -- | -- | |
15 | Repair the open in circuit 1540. Is the repair complete? | -- | -- |
