SOME OWNERS MAY COMMENT THAT THE CENTER ARMREST LID COMES OPEN WHEN STORED IN THE VERTICAL POSITION.
INSTALL A LENGTH OF 3M HOOK AND LOOP P/N 06480 OR EQUIVALENT USING THE FOLLOWING PROCEDURE.
1. FOLD CENTER ARMREST/STORAGE BOX DOWN AND OPEN COMPARTMENT LID AS ILLUSTRATED IN FIGURE 1.
2. CUT A 3-1/2 INCH PIECE OF 3M HOOK AND LOOP MATERIAL AND APPLY IT TO THE REAR EDGE OF THE STORAGE BOX AND LID AS INDICATED IN FIGURE 1, ITEM 1.
FOR VEHICLES REPAIRED UNDER WARRANTY, USE: LABOR OPERATION: T3412 LABOR TIME: 0.2 HR.
FIGURES: 1
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1993 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.