The original fuse label (located on the fuse block cover door) was printed with the 8 and 9 fuse names in reverse (See Figure 1).
Location 8 should read "5 amp - Elect. Brake System - Contr." Location 9 should read "5 amp - Elec. Brake Syst. - Pump" (See Figure 2).
Information found in the Owner's Manual and Service Manual is correct.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.