GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Engine 🢒 Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L 🢒 Front Wheel Drive Intermediate Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the right front wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement .

    3. Object Number: 1850442 Size: MH
  3. Remove the intermediate drive shaft mounting bolts from the engine bracket.

    4. Object Number: 1850888 Size: SH
  4. Remove the intermediate drive shaft from the vehicle.

Installation Procedure

    Object Number: 1850888 Size: SH
  1. Install the intermediate drive shaft to the transaxle.
  2. Position the intermediate shaft support bracket to the engine.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1850442 Size: MH
  3. Install the support bracket bolts.

    4. Tighten
    Tighten the bolts to 58 N·m (43 lb ft).


    Object Number: 1851039 Size: SH
  4. Install a new wheel drive shaft retaining ring.
  5. Install the right wheel drive shaft. Refer to Front Wheel Drive Shaft Replacement .
  6. Remove the support and lower the vehicle.