GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Engine Mount Vacuum Tank Replacement

Removal Procedure

    Object Number: 2000711 Size: SH
  1. Raise and support vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the active engine mount vacuum tank electrical connector (1).

    3. Object Number: 2000714 Size: SH
  3. Disconnect 3 engine mount vacuum lines (1) from the vacuum tank (2).

    4. Object Number: 2000725 Size: SH
  4. Remove the vacuum tank retaining bolt (1).

    5. Object Number: 2000747 Size: SH
  5. Remove the vacuum tank (1).

Installation Procedure

    Object Number: 2000747 Size: SH
  1. Position the vacuum tank (1).

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 2000725 Size: SH
  2. Install the vacuum tank retaining bolt (1).

    3. Tighten
    Tighten the bolt (1) to 10 N·m (89 lb in).


    Object Number: 2000714 Size: SH
  3. Connect 3 engine mount vacuum lines (1) to the vacuum tank (2).

    4. Object Number: 2000711 Size: SH
  4. Connect the active engine mount vacuum tank electrical connector (1).
  5. Lower the vehicle.