GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2008 🢒 Enclave 🢒 Body Hardware and Trim 🢒 Instrument Panel and Console Trim 🢒 Driver Knee Bolster Replacement

Driver Knee Bolster Replacement Acadia


Object Number: 1853514 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.

1

Driver Knee Bolster Screw (Qty: 2)

Tighten
2.5 N·m (22 lb in)

2

Drivers Knee Bolster Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the drivers knee bolster, transfer all necessary components.

3

Retainer Clip (Qty: 5)

Driver Knee Bolster Replacement Enclave


Object Number: 1858375 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.

1

Driver Knee Bolster Screw (Qty: 2)

Tighten
2.5 N·m (22 lb in)

2

Driver Knee Bolster Assembly

Procedures

  1. Disconnect the electrical connections.
  2. When replacing the knee bolster, transfer all necessary components.

3

Retainer Clip (Qty: 5)

Driver Knee Bolster Replacement Outlook


Object Number: 1839359 Size: MF

Callout

Component Name

Preliminary Procedure

Remove the hood latch release handle assembly. Refer to Hood Primary Latch Release Cable Handle Replacement.

1

Driver Knee Bolster Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.5 N·m(22 in lb)

2

Driver Knee Bolster Assembly

Procedure

  1. Disconnect the electrical connections.
  2. When replacing the steering column opening filler, transfer all necessary components.

3

Retainer Clip (Qty: 5)