Preliminary Procedures

1. Remove the left side catalytic converter. Refer to Catalytic Converter Replacement - Left Side
2. Support the engine. Refer to Engine Support Fixture.

1

Front Engine Mount Upper Nut

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Remove and discard front engine mount upper nut.
2. Allow adhesive on new engine mount nuts to cure for 24 hours after replacement.

Tip

Tighten
50 N·m (37 lb ft)

2

Rear Engine Mount Upper Nut

Procedure

1. Remove and discard rear engine mount upper nut.
2. Allow adhesive on new engine mount nuts to cure for 24 hours after replacement.

Tip

Tighten
50 N·m (37 lb ft)

3

Front Engine Mount Bracket Bolt

Tighten
58 N·m (43 lb ft)

4

Front Engine Mount Bracket

Tip
To remove engine mount bracket, use engine support fixture to raise engine.