Removal Procedure
- Turn the ignition OFF.
- Remove the oil level indicator from the oil level indicator tube.
- Remove the oil level indicator tube bolt.
- Remove the oil level indicator tube up through the exhaust manifold.
- If you are replacing only the oil level indicator tube seal, remove and discard the old seal.
Installation Procedure
- Install a new seal on the oil level indicator tube.
- Install the oil level indicator tube.
Caution: Refer to Fastener Caution in the Preface section.
- Install the oil level indicator tube bolt and tighten to
10 N·m (89 lb in)
.
- Install the oil level indicator in the oil level indicator tube.