Brake Pedal Position Sensor Replacement. Buick Enclave 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Enclave 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Brake Pedal Position Sensor Replacement

Callout	Component Name
Preliminary Procedure Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
1	Brake Pedal Position Sensor Bolt Caution: Refer to Fastener Caution in the Preface section. Tighten 3 N·m (27 lb in)
2	Brake Pedal Position Sensor Procedure Disconnect the brake pedal position sensor electrical connector. After the installation is complete, calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration.

Callout

Component Name

Remove the left instrument panel insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side.

Brake Pedal Position Sensor Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

Brake Pedal Position Sensor

Disconnect the brake pedal position sensor electrical connector.
After the installation is complete, calibrate the brake pedal position sensor. Refer to Brake Pedal Position Sensor Calibration.