GM Service Manual Online
For 1990-2009 cars only

Front Side Door Trim Panel Replacement - Right Side Traverse


Object Number: 1838646  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the passenger side power door lock and window switch. Refer to Door Lock and Side Window Switch Replacement - Passenger Side.

1

Front Side Door Pull Handle Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

2

Front Side Door Inside Handle Bezel Finish Cover

3

Front Side Door Trim Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Front Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

5

Front Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

6

Front Side Door Trim Panel Retainer (Qty: 9)

Front Side Door Trim Panel Replacement - Right Side Acadia


Object Number: 1838646  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the passenger side power door lock and window switch. Refer to Door Lock and Side Window Switch Replacement - Passenger Side.

1

Front Side Door Pull Handle Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

2

Front Side Door Inside Handle Bezel Finish Cover

3

Front Side Door Trim Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Front Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

5

Front Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

6

Front Side Door Trim Panel Retainer (Qty: 9)

Front Side Door Trim Panel Replacement - Right Side Enclave


Object Number: 1892404  Size: MF

Callout

Component Name

1

Front Side Door Pull Handle Cover

2

Front Side Door Inside Handle Bezel Finish Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

3

Front Side Door Trim Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

4

Front Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

5

Front Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

6

Front Side Door Trim Panel Retainer (Qty: 9)

Front Side Door Trim Panel Replacement - Right Side OUTLOOK


Object Number: 1892401  Size: MF

Callout

Component Name

Preliminary Procedure

Remove the passenger side power door lock and window switch. Refer to Door Lock and Side Window Switch Replacement - Passenger Side.

1

Front Side Door Upper Trim Panel

Tip
Use a plastic trim tool or equivalent to aid in the removal of the trim panel.

2

Front Side Door Pull Handle Cover

Tip
Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly.

3

Front Side Door Inside Handle Bezel Finish Cover

4

Front Side Door Trim Panel Bolt (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
6 N·m (18 lb in)

5

Front Side Door Locking Rod Knob Assembly

Procedure

  1. Ensure the locking rod is in the unlocked position.
  2. Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
  3. When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
  4. Push the detent tab into the lock knob to locking rod.

6

Front Side Door Trim Panel Assembly

Procedure

  1. Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
  2. Disengage the door lock cable.
  3. Disconnect the electrical connector.

7

Front Side Door Trim Panel Retainer (Qty: 9)