Note: Before removing the propeller shaft from the vehicle, paint or scribe reference marks on the transfer case flange to the propeller shaft flange and the rear differential drive flange to ensure minimal driveline system imbalance.
Note: If the propeller drive shaft cannot be removed, proceed to step 8. Failure to do so will damage the propeller shaft.
Note: Align the paint or scribe reference marks on the transfer case flange to the propeller shaft flange and the rear differential drive flange to ensure minimal driveline system imbalance.
Note: Install a few of the mounting bolts and washers to hold the propeller shaft in place.
Note: Install the mounting bolt to hold the center bearing in place.
Note: Install a few of the mounting bolts to hold the propeller shaft in place.
Caution: Refer to Fastener Caution in the Preface section.