Digital Radio Receiver Replacement. Buick Enclave 2009

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2009 🢒 Enclave 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Digital Radio Receiver Replacement

Callout	Component Name
Preliminary Procedures Remove the left rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement . Remove the liftgate close actuator bracket (if equipped). Refer to Liftgate Close Actuator Bracket Replacement .
1	Communication Interface Module Bracket Procedure Disconnect the electrical connectors.
2	Digital Radio Receiver Procedure Refer to Control Module References for programming and set up information. Tip Pull tab to release the receiver.

Callout

Component Name

Remove the left rear quarter lower trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
Remove the liftgate close actuator bracket (if equipped). Refer to Liftgate Close Actuator Bracket Replacement .

Communication Interface Module Bracket

Disconnect the electrical connectors.

Digital Radio Receiver

Refer to Control Module References for programming and set up information.

Tip
Pull tab to release the receiver.