Inspection and Cleaning Procedure
- Remove the rear seat. Refer to
Rear Seat Replacement.
- Inspect the seat track for debris or foreign materials, if the track needs to be cleaned, perform the following steps:
Warning: Refer to Safety Glasses and Compressed Air Warning in the Preface section.
| | Note: Use care when using compressed air to clear the sunroof drain hose. Do not exceed 241 kPa (35 psi).
|
| • | Use a flexible wire or 689 kPa (100 psi) of compressed air to clear any material plugging the obstructing the seat track. |
| • | The mechanical components of the seat track assembly receive lubrication during assembly. If any seat track needs additional lubrication, use multi-purpose lubricant GM P/N 12346241 (Canadian P/N 10953474) or equivalent. |
- Install the rear seat and test for proper operation. Refer to
Rear Seat Replacement.
