GM Service Manual Online
For 1990-2009 cars only

Object Number: 1828447  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the front seat belt anchor finish cover.
  2. Remove the front seat belt anchor plate bolt. Refer to Seat Belt Retractor Pretensioner Replacement - Front.

1

Front Seat Adjuster Bolt Finish Cover

Tip
Use a small flat-bladed tool to release the tab in the rear of the cover.

2

Front Seat Adjuster Bolt Finish Cover

Tip
Pull upward to release the retainer clip securing the cover to the seat adjuster.

3

Front Seat Assembly Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
45 N·m (33 lb ft)

4

Front Seat Assembly

Procedure

  1. Disable the SIR. Refer to SIR Disabling and Enabling.
  2. Lift the seat upward at the rear of the seat.
  3. Disconnect the electrical connectors.
  4. Slide the seat rearward to disengage the adjuster hooks holding the seat to the floor pan.