For 1990-2009 cars only
- Loosen the adjuster nut (1).
- Using a wrench to rotate the adjuster bolt (2), adjust the cam (3) to specifications.
- Using a wrench to hold the adjuster bolt (2), tighten the adjuster nut (1).
- Check the toe alignment and adjust if required. Refer to Rear Toe Adjustment .
- Test drive the vehicle.
Important: Make any adjustments to camber before setting toe.
Important: Left side toe adjustment is shown, right side toe adjustment is similar.
Notice: Refer to Fastener Notice in the Preface section.
Important: Ensure that the toe settings have not changed after torquing the adjuster nut to specifications. Readjust if necessary.
Tighten
Tighten the nut to 140 N·m (103 lb ft).
