For 1990-2009 cars only

Makes 🢒 Buick 🢒 2008 🢒 Enclave - AWD 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Sunshade Replacement

Sunshade Replacement for Buick Enclave - AWD 2008

Callout	Component Name
Preliminary Procedures Remove the windshield garnish moldings. Refer to Windshield Garnish Molding Replacement - Left Side and Windshield Garnish Molding Replacement - Right Side . Remove the sunshade anchor. Refer to Sunshade Anchor Replacement .
1	Sunshade Screw (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 3 N·m (25 lb in)
2	Sunshade Assembly Procedure Lower the front of the headliner enough to gain access to the sunshade electrical connector which is glued to the headliner. Disconnect the sunshade electrical connector.

Callout

Component Name

Sunshade Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (25 lb in)

Sunshade Assembly

Lower the front of the headliner enough to gain access to the sunshade electrical connector which is glued to the headliner.
Disconnect the sunshade electrical connector.