Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
|
Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
|
Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
|
Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
|
Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
- Transfer components as necessary.
|
Callout
| Component Name
|
Preliminary Procedures
- Move the rear seat to the full forward position.
- Remove the rear number 2 seat. Refer to
Rear Number 2 Seat Replacement.
- Remove the rear quarter upper trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the liftgate actuator rod from the liftgate. Refer to
Liftgate Actuator Rod Replacement.
- Disconnect the rear seat number 2 shoulder belt anchor bolt. Refer to
Rear Seat Number 2 Retractor Side Belt Replacement.
|
1
| Cargo Tie Down Loop Bolt Cap (Qty: 2)
|
2
| Cargo Tie Down Loop Bolt (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 3 N·m (27 lb in) |
3
| Cargo Tie Down Loop (Qty: 2)
|
4
| Body Side Trim Panel Armrest
Tip Pull upward on the armrest to disengage the retainer clips. |
5
| Cargo Screen Retainer Assembly
Tip Twist and pull outward to remove the retainer. |
6
| Rear Quarter Lower Trim Panel Bolt (Qty: 2)
Tighten 3 N·m (27 lb in) |
7
| Rear Quarter Lower Trim Panel Assembly
Procedure
- Pull outward to disengage the trim panel retainers.
- Disconnect the electrical connectors.
- Transfer components as necessary.
|