For 1990-2009 cars only
Tools Required
| • | EN 46106 Flywheel Holding Tool |
| • | J 38416-2 Crankshaft Button |
| • | J 41816 Crankshaft Balancer Remover |
- Install the EN 46106 through the starter mounting hole.
- Remove the crankshaft balancer bolt.
- Install the J 38416-2 in the nose of the crankshaft.
- Install the J 41816 in order to remove the crankshaft balancer.
- Tighten the center bolt of the J 41816 in order to pull the crankshaft balancer off of the crankshaft.
- Remove the J 41816 from the crankshaft balancer.
- Remove the EN 46106 .
