Step
System OK
| Action
| Yes
| No
|
DEFINITION: The
Dome lamps stay illuminated when all of the following conditions exist:
| • | All of the doors are closed. |
| • | The instrument panel (IP) dimmer switch is off. |
| • | The Dome lamp switches are off. |
| • | The interior lamps override switch is on (the interior lights
are enabled). |
| • | None of the interior lighting modes are activated. |
The inadvertent load (battery rundown) protection turns off the Dome
lamps after 10 minutes.
|
1
| Was the Lighting Systems Diagnostic System Check performed?
| Go to
Step 2
| Go to
Diagnostic System Check - Lighting Systems
|
2
|
- Close all of the doors.
- Turn off the IP dimmer switch.
- Turn the ignition switch to the RUN position.
- Cycle the switches for the Dome lamps between the ON position
and the OFF position.
Do the Dome lamps turn OFF?
| Go to
Step 4
| Go to
Step 3
|
3
| Replace the Dome lamps assembly.
Did you complete the repair?
| Go to
Step 4
| --
|
4
|
- Turn the ignition switch to the LOCK position.
- Reinstall the connectors/components previously removed.
- Operate the system in order to verify the repair.
Did you correct the condition?
| System OK
| Go to
Step 2
|
