For the DE 100 series radio, complete the following procedure, with the key in the ON position use a scan tool, in order to properly set up communication:

1. At the Main Menu screen, select F0: Diagnostics.
2. At the Vehicle Identification screen, select the following options:

2.1.	2000 (Model Year)

2.2.	LD Trk, MPV, Incomplete

3. At the System Selection Menu screen, select F1: Body.
4. At the Vehicle Identification screen, select U or X (Platform type).
5. At the Body screen, select F3: Radio.
6. At the Radio screen, select F1: Special Functions.
7. At the Special Functions screen, select F4: Radio Setup.
8. Select the appropriate radio. Uplevel Radio is anything other than the Base AM/FM Radio.

Important: The F4: Radio Setup option does not contain a submenu. Radio Setup will configure the following systems:

In order to calibrate the radio, begin at the Special Functions screen. Repeat step 1 through step 7 of the Radio Setup, if needed.

At the Special Functions screen, select F2: Country Code.

Important: The F2: Country Code option does not contain a submenu. Country Code sets the point of sale, or origin, in the radio in order to calibrate the tuner for the country that the vehicle will be used in.

In order to set the chime volume, begin at the Special Functions screen. Repeat step 1 through step 7 of the Radio Setup, if needed.

1. At the Special Functions screen, select F1: Set Options.
2. At the Set Options screen, select F0: Chime Settings.
3. At the Chime Settings screen, select the following option:

•	F1: Loud Chime Volume

•	Select the appropriate voltage/volume level.

Important: The F1: Loud Chime Volume option does not contain a submenu. This selection is used for setting the volume when the radio is replaced.

In order to set the Chime Level, begin at the Special Functions screen. Repeat step 1 through step 7 of the Radio Setup, if needed.

1. At the Special Functions screen, select F1: Set Options.
2. At the Set Options screen, select F0: Chime Settings.
3. At the Chime Settings screen, select F0: Chime Level.

Important: The F0: Chime Level option does not contain a submenu. The Chime Level setting has an option of setting a normal chime or a loud chime when the radio is replaced.