GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 GL7 (Export) 🢒 Body and Accessories 🢒 Wiring Systems 🢒 Steering Wheel Inflatable Restraint Module Coil Replacement

Removal Procedure

    Object Number: 82187 Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System .
  2. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  3. Remove the upper and lower steering column shrouds.
  4. Remove the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column - Tilt.
  5. Disconnect the radio steering wheel controls inline connector C205 located at the base of the steering column.
  6. Remove the wiring harness straps from the steering wheel column wiring harness.
  7. Remove the retaining ring.
  8. Remove the inflatable restraint steering wheel module coil from the steering shaft.

Installation Procedure

    Object Number: 82187 Size: SH
  1. Install the inflatable restraint steering wheel module coil to the steering shaft.
  2. Install the retaining ring.
  3. Route the lower coil wiring harness along steering column and install the necessary wiring harness straps.
  4. Connect the radio steering wheel controls inline connector C205.
  5. Install the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column - Tilt.
  6. Install the upper and lower steering column shrouds.
  7. Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  8. Enable the SIR system. Refer to Enabling the SIR System .