Step | Action | Yes | No |
|---|---|---|---|
1 | Did you perform the hydraulic brakes diagnostic system check? | Go to Step 2 | |
2 | Inspect the brake fluid level. Is the brake fluid level OK? | Go to Step 3 | Go to Brake Fluid Leak |
3 |
Is the brake warning indicator still on? | Go to Step 4 | Go to Step 5 |
4 | Disconnect the brake fluid level indicator sensor. Is the brake warning indicator still on? | Go to Step 6 | Go to Step 7 |
5 | Replace the park brake indicator switch. Refer to Parking Brake Indicator Switch Replacement in Park Brake. Did you complete the replacement? | Go to Step 10 | -- |
6 | Test the signal circuit of the park brake indicator switch for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
7 | Replace the brake fluid level indicator sensor. Refer to Brake Fluid Level Indicator Switch Replacement in Hydraulic Brakes. Did you complete the replacement? | Go to Step 10 | -- |
8 | Test the signal circuit of the brake fluid level indicator sensor for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
9 | Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges, and Console. Important: Perform the set up procedure for the IP. Did you complete the replacement and the set up procedure? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
