Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the operation and perform the necessary inspections? | -- | Go to Symptoms | |
2 |
Does the DOOR AJAR message turn on with the driver's door open? | -- | Go to Step 3 | Go to DOOR AJAR Indicator Inoperative in Doors |
3 |
Important: Refer to
Caution: When you are performing service on or near the SIR components or the
SIR wiring, you must disable the SIR system. Refer to Disabling the SIR System.
Failure to follow the correct procedure could cause air bag deployment,
personal injury, or unnecessary SIR system repairs.
Does the test lamp illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 | Replace the BCM. Refer to Body Control Module Replacement in Body Control Systems. Is the repair complete? | -- | Go to Step 11 | -- |
5 | Test the control circuit of the ignition key alarm switch for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the BCM connector C2. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 7 |
7 | Connect a test lamp between the ground circuit of the ignition key alarm switch and B+. Refer to Circuit Testing in Wiring Systems. Does the test lamp illuminate? | -- | Go to Step 8 | Go to Step 9 |
8 | Inspect for poor connections at the harness connector of the ignition key alarm switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 10 |
9 | Repair the open in the ground circuit of the ignition key alarm switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 11 | -- |
10 | Replace the ignition key alarm switch. Refer to ignition and key alarm switch replacement in Steering Wheel and Column - Tilt. Is the repair complete? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
