Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The SECURITY indicator is inoperative | ||||
1 | Did you perform the theft deterrent diagnostic system check? | -- | Go to Step 2 | |
2 |
Does the battery indicator turn on during bulb check? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Inspect for poor connections/terminal tension at the instrument panel (IP) cluster harness connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 5 | Go to Step 4 |
4 | Replace the Instrument Panel (IP) Cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges, and Console. Important: Perform the set up procedure for the IP. Did you complete the replacement and the set up procedure? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
