Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The lock or unlock functions do not work through one of the door lock switches. However, the other door lock switch locks and unlocks the doors. | ||||
1 | Did you review the operation and perform the necessary inspections? | -- | Go to Symptoms | |
2 |
Does the test lamp illuminate? | -- | Go to Step 3 | Go to Step 6 |
3 | While observing the door locks, connect a 10A fuse jumper between the inoperative door lock switch harness connector terminal A and terminal E. Refer to Circuit Testing in Wiring Systems. Do the door locks lock? | -- | Go to Step 4 | Go to Step 7 |
4 | While observing the door locks, connect a 10A fuse jumper between the inoperative door lock switch harness connector terminal D and terminal E. Refer to Circuit Testing in Wiring Systems. Do the door locks unlock? | -- | Go to Step 5 | Go to Step 8 |
5 | Replace the inoperative door lock switch. Refer to Door Trim Plate Replacement . Is the repair complete? | -- | Go to Step 9 | -- |
6 | Repair the poor connection or the open in circuit 750. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
7 | Repair the poor connection or the open in circuit 195. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
8 | Repair the poor connection or the open in circuit 194. Refer to Wiring Repairs or Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Step 9 | -- |
9 |
Are there any BCM DTCs present? | -- | Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System | Go to Step 10 |
10 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | |
