GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 GL7 (Export) 🢒 Body and Accessories 🢒 Doors 🢒 Sliding Door Window Weatherstrip Replacement

Removal Procedure
  1. Remove the sliding door swing out window. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .

    2. Object Number: 320079 Size: SH
  2. Pull the sliding door window weather-strip from the pinch-weld flange.
  3. Remove the sliding door window weather-strip from the sliding door.

Installation Procedure

    Object Number: 320079 Size: SH

    Important: The swing out window weather-strip service replacement part is a cut-to-fit part. The weather-strip must be trimmed to fit the window opening and joined together.

  1. Install the sliding door window weather-strip to the sliding door.
  2. Align the sliding door window weather-strip to so the joint is at the center of the sliding door window latch attachment point.
  3. Roll the sliding door window weather-strip from the joint to the bottom of the window in order to ensure a proper seal.
  4. Install the sliding door swing out window. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .