GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the recliner cover screws.

  2. Object Number: 317124  Size: SH
  3. Unsnap the covers (4) from the recliner starting from the rear of the cover.

Installation Procedure


    Object Number: 317126  Size: SH
  1. Snap the cover (3) to the recliner starting from the front of the cover.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the recliner cover screws.
  4. Tighten
    Tighten the recliner cover screws to 2 N·m (18 lb in).