GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 GL7 (Export) 🢒 Body and Accessories 🢒 Body Rear End 🢒 Liftgate Pull Strap Replacement

Removal Procedure
  1. Open the liftgate.

    2. Object Number: 313623 Size: MH
  2. Remove the retaining screws (2) from the pull strap (1).
  3. Remove the pull strap (1) from the liftgate.

Installation Procedure

    Object Number: 313623 Size: MH
  1. Install the pull strap to the lift gate.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the pull strap retaining screws (2).

    3. Tighten
    Tighten the retaining screws to 1.9 N·m (17 lb in).

  3. Close the liftgate.