GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 GL7 (Export) 🢒 Body and Accessories 🢒 Body Rear End 🢒 Liftgate Latch Striker Replacement

Removal Procedure
  1. Open the liftgate.

    2. Object Number: 313613 Size: SH
  2. Remove the retaining bolts from the liftgate striker.
  3. Remove the liftgate striker and the spacer from the vehicle.

Installation Procedure

    Object Number: 313613 Size: SH
  1. Align the spacer and the liftgate striker to the holes in the body.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the liftgate striker retaining bolts.

    3. Tighten
    Tighten the retaining bolts to 25 N·m (18 lb ft).

  3. Close the liftgate.