This table identifies which serial data link that a particular module uses for in-vehicle data transmission. Some modules may use more than one data link to communicate. Some modules may have multiple communication circuits passing through them without actively communicating on that data link. This table is used to assist in correcting a communication malfunction. For the description and operation of these serial data communication circuits refer to Data Link Communications Description and Operation .
Control Module | Data Link Type | Diagnostic Procedure | ||||
---|---|---|---|---|---|---|
Schematic Reference: Data Link Connector Schematics | ||||||
Body Control Module (BCM) | Class 2 | |||||
Electronic Brake Control Module (EBCM) | Class 2 | |||||
Engine Control Module (ECM) (LY7) 3.6-L |
| |||||
HVAC (CJ2), (C67) | Class 2 | |||||
Inflatable Restraint Sensing and Diagnostic Module (SDM) | Class 2 | |||||
Instrument Panel Cluster (IPC) | Class 2 | |||||
Radio | Class 2 | |||||
Digital Radio Receiver (DRR) (U2K) | Class 2 | |||||
Powertrain Control Module (PCM) (L26) | Class 2 | |||||
Transmission Control Module (TCM) (LY7) 3.6-L only | High Speed GMLAN | |||||
Vehicle Communication Interface Module (VCIM) (UE1) | Class 2 |