For 1990-2009 cars only
Removal Procedure
- Open the hood.
- Remove the rear side hood seal from the pinchweld flange and motor compartment flange.
- Remove the rear side hood seal from the vehicle.
- Clean any adhesive from the pinch-weld flange and motor compartment flange surface using 3M™ P/N 8984 Adhesive Remover.
Installation Procedure
- Remove the protective backing paper from the adhesive on the rear side hood seal.
- Install the rear side hood seal to the pinchweld flange and motor compartment flange.
- Install the side rear hood seal onto the pinch-weld flange and motor compartment flange until the adhesive is fully adhered.
- Close the hood.
