GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Important: The outside handles have adjustable outside handle lock rods. This allows for adjustment of the amount of travel needed in order to operate the outside handle.

    When servicing a vehicle with adjustable outside handle lock rods, remove all free play between the outside handle and the lock. Also, do not operate the outside handle before these connections are made.

  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Raise the door window to the full up position.

  4. Object Number: 1350838  Size: SH
  5. Open the outside handle rod to lock clip located on the door lock.
  6. Remove the outside door handle. Refer to Front Side Door Outside Handle Replacement .

  7. Object Number: 1363642  Size: SH
  8. Remove the outside door handle (1) and the rod (2) from the door.

Installation Procedure


    Object Number: 1363642  Size: SH
  1. Install the outside door handle (1) and the rod (2) to the door.
  2. Install the outside door handle. Refer to Front Side Door Outside Handle Replacement .

  3. Object Number: 1350838  Size: SH
  4. Install the outside handle rod into the clip.
  5. Close the clip over the outside handle rod.
  6. Remove the masking tape.
  7. Inspect the door for proper operation.
  8. Install the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
  9. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .