Removal Procedure
- Insert a flat-bladed tool at the rear end
of the lens and pry out to remove the lens.
- Remove the light bulb if necessary.
- Insert a flat-bladed tool behind the lamp assembly at the switch end and
pry that end out.
- Disconnect the courtesy/reading lamp wiring harness from the socket.
- Slide the lamp assembly out of the headliner.
- Remove the lamp assembly from the vehicle.
Installation Procedure
- Install the tab end of the lamp into the headliner.
- Connect the wiring harness to the lamp.
- Press the lamp into the headliner.
- Install the lamp bulb if removed.
- Position the tab end of the lens in the lamp and press in to install the
lens.