Removal Procedure
- Remove the front door trim panel enough to access the courtesy
lamp. Refer to
Front Side Door Trim Panel Replacement
in Doors.
- Disconnect the electrical
connector from the courtesy lamp.
- Release the courtesy lamp
by depressing the forward retainer.
- Remove the courtesy lamp
out of the front door trim panel, by pressing outward on the courtesy lamp
and pulling out from the front of the door trim panel.
- Rotate the lamp socket
counterclockwise to release the socket from the lamp housing, then remove
the socket.
- Remove the bulb from the
socket.
Installation Procedure
- Install the bulb to the
door courtesy lamp socket.
- Install the lamp socket
to the courtesy lamp housing, then rotate the socket clockwise.
- Position the courtesy
lamp to the front door trim panel.
- Align the rear edge of
the courtesy lamp retainer tab to the front door trim panel.
- Install the courtesy lamp
to the front door trim panel pressing the forward edge into place until the
retainer is fully seated.
- Connect the electrical
connector from the courtesy lamp.
- Install the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
in Doors.