Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the wiper arms. Refer to Wiper Arm, Blade, Insert Replacement - Front .
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

1

Wiper System Module Bolt (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Wiper System Module Nut (Qty: 1)

Tighten
10 N·m (89 lb in)

3

Wiper Motor Nut (Qty: 3)

Tighten
10 N·m (89 lb in)

4

Wiper Drive System Module

5

Wiper Motor

Tip
Disconnect the electrical connector.