Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement .

1

Windshield Side Upper Cap

Tip
Use a small flat-bladed tool to release the cap from the molding.

2

Windshield Side Upper Garnish Molding Screw

Tighten
2 N·m (18 lb in)

3

Windshield Side Upper Garnish Molding

Tip

1. Pull the molding away from the windshield pillar to disengage the clips.
2. Disconnect the electrical connector from the speaker.

4

Radio Windshield Side Garnish Molding Grille

5

Radio Windshield Side Garnish Molding Speaker

6

Windshield Side Garnish Molding Clip (Qty: 2)