GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2009 🢒 LaCrosse 🢒 Engine 🢒 Engine Electrical 🢒 Starter Shield Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 772392 Size: SH
  2. Remove the fasteners securing the starter heat shield to the starter.
  3. Remove the starter heat shield.

    4. Object Number: 772393 Size: SH
  4. Remove the nut securing the starter heat shield mounting bracket to the starter.
  5. Remove the starter heat shield mounting bracket.

    6. Object Number: 847390 Size: SH
  6. Remove the nut securing the starter heat shield mounting bracket to the engine block.
  7. Remove the starter heat shield mounting bracket.

Installation Procedure

    Object Number: 847390 Size: SH
  1. Install the starter heat shield mounting bracket to the stud located at the engine block.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the nut securing the starter heat shield mounting bracket to the engine block.

    3. Tighten
    Tighten the starter heat shield mounting bracket nut to 8 N·m (71 lb in).


    Object Number: 772393 Size: SH
  3. Install the starter heat shield mounting bracket to the stud located at the rear of the starter motor.
  4. Install the nut securing the starter heat shield mounting bracket to the starter.

    5. Tighten
    Tighten the starter heat shield mounting bracket nut to 8 N·m (71 lb in).


    Object Number: 772392 Size: SH
  5. Position the starter heat shield to the starter motor and brackets.
  6. Install the fasteners securing the starter heat shield to the starter motor and brackets.

    7. Tighten
    Tighten the starter heat shield fasteners to 8 N·m (71 lb in).

  7. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.