The purpose of New Product Information is to highlight or indicate important product changes from the previous model year.
Changes may include one or more of the following items:
| • | A component comparison from the previous year |
| • | Torque values and/or fastener tightening strategies |
| • | Changed engine specifications |
| • | New sealants and/or adhesives |
| • | Disassembly and assembly procedure revisions |
| • | Engine mechanical diagnostic procedure revisions |
| • | New special tools required |
Component Comparison
| • | New upper and lower intake |
| • | ETC (Electronic Throttle Control) throttle body |
| • | Oil Level indicator tube |
| • | New MAP and BARO Sensors |
| • | New MAP and BARO sensor bracket and retainer clips |
| • | Direct mount EVAP purge valve |
Fastener Changes
EVAP Purge Valve bolt has been added 16 N·m (12 lb ft).
Torque Values and/or Fastener Tightening Strategies
No torque value changes for 2009.
Changed Engine Specifications
No engine specification changes for 2009.
New Sealants and/or Adhesives
No new sealants and or adhesives for 2009.
Disassembly and Assembly Procedure Revisions
| • | Supercharger Removal/Installation procedures have been revised - L32. |
| • | Intake Manifold Removal/Installation Procedures have been revised - L26. |
Engine Mechanical Diagnostic Procedure Revisions
No engine diagnostic procedure revisions for 2009.
New Special Tools Required
J 45059 Angle Meter has replaced the J 36660-A Torque Angle Meter.
