Preliminary Procedure

Loosen either the LF or RF bumper fascia corner in order to flex the fascia when removing the headlamp assembly. Refer to Front Bumper Fascia Replacement.

1

Headlamp Retainer Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Headlamp Retainer

Tip
Lift the retainer straight upward in order to release the headlamp assembly from the headlamp mounting panel.

3

Headlamp Retainer

Tip
Lift the retainer straight upward in order to release the headlamp assembly from the headlamp mounting panel.

4

Headlamp Assembly

Tip
Carefully pull the headlamp assembly forward and disconnect the electrical harness connector