Warning: Refer to Park Brake Cable to Caliper Warning in the Preface section.

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.



2. Disconnect the left rear park brake cable and adjustment stud assembly from the equalizer assembly by removing the equalizer nut from the adjustment stud.



3. Disconnect the front park brake cable (1) from the right rear cable (3) at the connector clip (2).



4. Remove the equalizer assembly from the front park brake cable. Insert a flat-bladed tool into the equalizer and lightly twist to reposition the equalizer retaining tab. This will release the assembly from the cable.

1. Install the equalizer assembly to the front park brake cable.



2. Connect the front brake cable (1) to the right rear cable (3) at the connector clip (2).
3. Connect the left rear brake cable and adjustment stud assembly to the equalizer assembly by installing the adjustment stud to the equalizer nut.
4. Adjust the park brake. Refer to Park Brake Adjustment.
5. Lower the vehicle.